Skip to content
81 West Pender Street Unit D, Vancouver, BC V6B 1R3 | +1 (877) 967-7468 | 250 Yonge St #2201 Toronto, ON M5B 2L7 | (647) 361-4527
81 West Pender Street Unit D, Vancouver, BC V6B 1R3 | +1 (877) 967-7468 | 250 Yonge St #2201 Toronto, ON M5B 2L7 | (647) 361-4527
Something new! Kitchen, shower and interior print and install work.

Something new! Kitchen, shower and interior print and install work.

We recently were involved in a huge project with Westbank in one of their new buildings on Main and Keefer street in Vancouver. We worked on a couple of projects for them in that building. The first was the kitchen backsplashes in the suites. The second was their shower prints that were printed onto the glass.

This was a very detailed orientated job and we had to print and install everything to meet their standards. Here are some pictures of the shower glass prints.

#block-yui_3_17_2_1_1476205060123_31407 .sqs-gallery-block-grid .sqs-gallery-design-grid { margin-right: -20px; } #block-yui_3_17_2_1_1476205060123_31407 .sqs-gallery-block-grid .sqs-gallery-design-grid-slide .margin-wrapper { margin-right: 20px; margin-bottom: 20px; }

The kitchen backsplashes had to be done so that the heat from the stove and the water from the sink would not ruin the print over time.

We did some glass prints as well that were put up in the building.

#block-yui_3_17_2_1_1476811644731_52501 .sqs-gallery-block-grid .sqs-gallery-design-grid { margin-right: -20px; } #block-yui_3_17_2_1_1476811644731_52501 .sqs-gallery-block-grid .sqs-gallery-design-grid-slide .margin-wrapper { margin-right: 20px; margin-bottom: 20px; }

We used a high end artwork printer 2400dpi for this project. Westbank is responsible for Vancouver House and Telus Sky in Calgary along with many other major buildings. We wanted to be sure to provide them with the best quality and pricing for this project in Vancouver and hope to work with them more in the future.

 

Previous article Trying to help our Planet by recycling fabric banners and other materials.

Leave a comment

Comments must be approved before appearing

* Required fields

Get a Quote